Happy Birthday Terry!

Here is the resting place for Terry's plane. Will be one of the first things he sees when he wakes up in the morning and the last when going to bed. Hope it sparks his imagination, make him day dream or just enjoy his plane.

Happy Birthday Terry, love dad.

Photo Gallery

Birthday Party

Well today's the party for my second son Terry's 5th birthday and here he is with his new plane! While it was a challenge to build the aircraft in such a short time I am very happy with how it turned out. Total build time calculated was approximately 49 hours and 8 minutes.

Landing Gears

With Terry’s birthday party being held tomorrow (his actual birthday is on the 29th) I installed the last part, the landing gears. The tail wheel actually comes from an old unbuilt Revell AV-8B Harrier kit that was missing parts as the supplied wheel was very simple and not nice.

Red Nose

With the clear spray paint and mask removed I installed the red nose cone and I have to admit I find this kit very stunning.

Sharks Mouth

Finished painting the propeller which required seven coats of yellow paint. Also painted the inside of the mouth as I have seen several reference photos with this paint scheme that I prefer, make the aircraft appear to be even more menacing.

Also regretted removing the Tamiya masking tape which I suspected would happen as I had to re-mask the cockpit window in preparation of spraying painting the aircraft with a clear to seal the decals to the model.

Decals

Finished adding the decals to the aircraft which went well. I find this step fun and enjoy how it adds so much more details very quickly. The mouth piece was very challenging and took twenty some minutes to position properly but it is also my favorite element giving the kit a lot of character.

Wheel Struts

Completed the wheel struts, added black electric wires for extra detail.

Positioning the Guns

With the machine guns painted with Tamiya XF-1 Flat Black, I super glued them into the wings.

I also glued the motor exhaust pipes into place.

Making the Guns

With some very small brass tubing I used a razor blade to cut six 1/2 inch pieces to make the machine guns. Using a razor blade avoids crushing the pipe. Also drilled six holes into the wings with a Dremel drill.