Thursday, April 7, 2016

Wiring Woes & Anchor Improvments

After the difficulties that I experienced getting the wiring thought the hull, I realized that the wires would not pass behind the wall of the hangar. I tried shaving the inside of the hull but it was pretty evident that this was not going to work. So I snuck the wires back underneath the hangar deck and with some tweezers managed to pull it out from underneath.

I also read an article in FineScale Modeller where a division was added in the hull so that light would not pass through where the anchor chains would pass. Found it was a good idea so I glued a small piece of styrene and gave it a quick coat of grey paint (just good enough so that it would look dark inside.

No comments: